Thread
:
Home Made Safty Flag
View Single Post
#
1
04-22-2007, 08:32 AM
Bay Stalker
Plug Builder
Join Date: Apr 2007
Posts: 9
Rep Power:
0
Home Made Safty Flag
Well I decided that $30. was a little much for a flag and decided to make one. I had a broken VHF antenna lying around and thought this looked like a perfect flag mount. I cut it down to 4' and cut out the end to fit in a Scotty flush mount rod holder. This holder also is used for my light when fishing at night. I then install a top, I used a small but cap I had for making rods. For the flag I used was made from an old cheep PFD. I drilled two small holes in the pole and through wired loops with SS wire that I use for plug making. I then used large split rings to attach the flag to it. I am waiting on some 3M tape and will add some to the flag and the yak.
__________________
-----------
In The Dead Of The Night,
--------------
You Will Not See Me
--------------
You Will Not Hear Me
--------------
You Will Not Find Me
---------
But You Will Know, I Am There
Bay Stalker
View Public Profile
Send a private message to Bay Stalker
Find all posts by Bay Stalker