Deryk's kayak cart. He fabricated it from PVC and recycled parts. Kayak fishing is an economy sport from the word go, and this cart exemplifies that. Nice job on the cart :).
pvc kayak cart
Materials Used:
1. 10 ft of 1 inch diameter, schedule 40 PVC pipe 5. Five 1 inch PVC pipe T connectors
2. Two 1 inch PVC end caps 6. 36 inch 3/8 inch diameter steel rod and four nuts and washers
3. Small bottle of PVC glue 7. 5 ft of Nylon webbing and snap connectors (from old bicycle carrier)
4. Two 12 inch diameter wheels with inflatable tires (from discarded baby carriage) 8. Four foam tubes ( from discarded exercise machine)
Cost of purchased parts was $20 at local hardware store, maybe cheaper at Home Depot
PVC kayak cart

Specifications:
Wheel spacing 29 inches
Axle tube 24 inches
Upright supports 9 inches
Support spacing 18 inches
Four boat supports each 8 inches long
Removeable T bar 20 inches long
home made kayak cart
 
 
 
accessories button loading apple computers united anglers of southern california
 
Site Map | Terms Of Use | ©2007 All KayakFishing | Home Made PVC Kayak Cart