Left Photo:
A resourceful design using readily available materials. These buckets can be picked up at almost
any department or hardware store. A general consensus is that bait tanks that are round in shape
are better than those with any corners in them. Also in the photo is the priming bulb connected to the
3/8 inch hose.
Center Photo:
The top of the tank. I'm not sure exactly how this was made, but it looks like you could take the top off
another bait bucket and cut/blend it to the top of the lid.
Right Photo:
This is the discharge for the tank made out of 1 1/2 inch tubing.
Photo's courtesy of Billbeau.
|
